Arizona Courtlines, Inc. (ACI)

Football Goal Posts

 

NFHS Field Diagram

 

NCAA Field Diagram

 

Model FBGP-4 _ (4-1/2" diameter post)
  • Post is gooseneck type 4-1/2" diameter galvanized steel pipe
  • Extensions available in 5'-3" or 6'-3" (specify when ordering)
  • Crossbar is 3-1/2" diameter galvanized steel tubing
  • Crossbar upper edge is 10'-0" above the playing surface
  • Uprights are fabricated from 2" diameter galvanized steel tubing
  • Uprights are 20'-0" in length and extend 30'-0" above the playing surface
  • Uprights are spaced 23'-4" from inside to inside (of uprights)
  • Top of uprights have welded caps to prevent water damage
  • Goal post is finished with two coats of white paint (specify color if other then white)
  • All hardware is a minimum 1/2" diameter (pull out strength of 17,000 lbs. and shearing strength of 12,100 lbs.)
  • All hardware is zinc plated
  • Available for permanent (footing detail) or sleeve type systems (specify when ordering)
See Drawing

Model FBGP-5 _ (5-9/16" diameter post)
  • Post is gooseneck type 5-9/16" diameter galvanized steel pipe
  • Extensions available in 5'-3" or 6'-3" (specify when ordering)
  • Crossbar is 3-1/2" diameter galvanized steel tubing
  • Crossbar upper edge is 10'-0" above the playing surface
  • Uprights are fabricated from 2" diameter galvanized steel tubing
  • Uprights are 20'-0" in length and extend 30'-0" above the playing surface
  • Uprights are spaced 23'-4" from inside to inside (of uprights)
  • Top of uprights have welded caps to prevent water damage
  • Goal post is finished with two coats of white paint (specify color if other then white)
  • All hardware is a minimum 1/2" diameter (pull out strength of 17,000 lbs. and shearing strength of 12,100 lbs.)
  • All hardware is zinc plated
  • Available for permanent (footing detail) or sleeve type systems (specify when ordering)
See Drawing

Model FB-SCG-2H (Football / Soccer Goal Combination)
  • Goal post is fabricated from 2-3/8" diameter steel tubing
  • Uprights extend 20'-0" above the playing surface
  • Top of uprights have welded caps to prevent water damage
  • Crossbar is a welded assembly with three vertical supports (webbing)
  • Upper edge of crossbar assembly is 10'-0" above the playing surface
  • Lower edge of crossbar assembly is 8'-0" above the playing surface
  • Crossbar assembly attaches to the uprights with adjustable support clamps
  • Crossbar assembly secures uprights 24'-0" apart (inside to inside)
  • Goal post is finished with two coats of white paint (specify color if other then white)
See Drawing