Lubricants:

LUBRICANTS

A clear lubricant for all sliding and rubbing surfaces which eliminates squeaks, prevents sticking and keeps rubber gaskets soft and flexible.

Oil free, odorless & non-staining
Excellent electrical resistance
Reduces noise where friction occurs
Leaves no gummy residue
Resists acids and alkalis
Use on windows, doors, linkages, speedometer cables, shovels, slides, rubber seals, moldings, weatherstripping

A viscous lubricant that offers superior lubricity and adhesion to gears after each release.

Increases life of gears
Improves gear's efficiency
Protects against rust and corrosion
Performs under extreme temperatures and pressures
Will not wash or weather away
Leaves a black tacky film
Will not dry out and leave harmful deposits
Unaffected by salt water, detergents and most chemicals
Use for open gears, cams, slides, roller chains, slow moving bearings, latches, construction equipment, loading equipment and anywhere a high performance grease is needed under heavy loads

A light weight, black lubricant with exceptional penetrating qualities.

Penetrates bearing surfaces of pins and bushings as well as the core of wire rope
Displaces water
Resists rust
Non-corrosive
Keeps chains supple
Excellent clinging and wicking properties
Prolongs wire rope life
USDA approved
Uses include: All light chains not running through an oil bath, chain saws, elevator cables, link & roller assemblies, sprockets, hinges, conveyors, drive chains, wire rope and cables

A clear all purpose fluid lubricant that withstands pressure from heavy loads and high RPM's within a wide temperature range.

Excellent rust resistance
Long lasting
Superior corrosion protection
Optimum protection from friction
Superior lubricity on all metal to metal contact points
Stops sticking and grating
Use for bearings, heavy chains, cables, winches, pulleys, construction equipment and industrial equipment

A quick-drying, thin film that provides superior lubrication under extreme pressures and a broad range in temperatures.

Quick drying
Tight adhesion
Protects against seizing, fretting, scoring & galling
Oil free
Will not pick up dirt
Greatly reduces metal to metal friction
USDA approved
Provides excellent anti-wear protection for cutting and forming tools
Dust-free lubricant for preassembly and production
Use for wire drawing, gasket and stop-off coating, rubber mold release, machine tool slides, conveyors (high temperatures), heat forming machine parts, boiler studs, heat exchangers, pressed fittings, loaded cams.

DRY FILM GRAPHITE LUBE

A black, non-oily lubricant that dries quickly to form a film with good long lasting characteristics.

Quick-dry
Provides even dispersion of graphite film
Dry surface minimizes dust and dirt pick-up
Can be applied to any dry surface
Temperature range: 100 degrees F to 850 degrees F (38 degrees C to 454 degrees C)
Does not contain oil or water base diluters
Piece can be used immediately-no waiting
Works in adverse conditions
Use on bearings, hinges, rollers, speedometer cables, flat springs
Use where a dry lubricant is essential
Excellent clinging and adhesion properties

5-WAY CORROSION INHIBITOR AND LUBE

A mixture of a highly refined lubricant, a penetrant and a water displacing chemical.

Displaces moisture
Lubricates & prevents rust
Does not contain silicone
Reduces friction
Stops squeaks
Does not contain silicone
Extremely low surface tension
Use for bearings, gears, hinges, chains, frozen nuts and bolts, hitches, latches, threads and pulleys, any metal part requiring lubrication and rust protection
Meets the following government specifications: MIL-C-16173D and MIL-C-23411 (metal corrosion test) and MIS-C-22235A (stain test)

Specially formulated, light weight oil and penetrant that releases corroded and rusted parts.

Fast acting -- cuts through rust, dirt and scale
Leaves an anti-rust film for continued protection
Safe on all metals, alloys, rubber and most painted surfaces
Use for freeing fasteners, nuts, bolts, pins and valves
Effective for all rusted and corroded parts
This product has a special mixture of solvents, penetrants, lubricants and corrosion inhibitors that "frees" corroded and rusted parts quickly

A lubricant that aids in the assembly and disassembly of mating parts that are subjected to extreme heat, pressure and corrosion.

Reduces wear and friction
Eliminates galling & seizing at 1,000 degrees F (538 degrees C)
Stops galvanic pitting
Eases dismantling
Will not wash, scrape or burn off
Excellent for marine applications or where salt water corrosion could be a problem
Use for all types of threaded assemblies, flange bolts, engine header bolts, high temperature connections, manhole lugs, and stud assemblies