MRO SPECIALTIES

20 ounce cans.

MRO ELECTRIC MOTOR CLEANER

A special formulation of solvents, additives and propellant that cleans delicate electrical components and motors for efficient and tumble free operation.

• Safe on electrical equipment
• No residue
• Fast acting
• Quick and deep penetration
• Apply while motor is running
• Non-flammable
• Acts as a light lubricant
• USDA approved
• No rinsing or wiping
• Use on motors, fans, generators, terminals, transformers, switches, ignition systems, relays, circuit breakers, typewriters and most electrical equipment
• Due to its complex formulation, first apply to a test area and examine for acceptability

MRO INDUSTRIAL STRENGTH GLASS CLEANER

A quick acting, foaming formulation that cuts through greasy films and dirt and leaves a bright, sparkling shine.

• Retards fogging
• Brightens and polishes
• No film residue
• Non-abrasive yet cleans gritty dirt
• Contains ammonia plus other cleaning power additives
• Use on all glass surfaces: car mirrors, windows, glass table tops, shower doors. Cleans vinyl coverings, counter tops, hardwood surfaces, porcelain, tile, chrome and stainless steel
• Note: Due to its complex formulation, this product should first be applied to a test area and examined for acceptability
• Use sparingly, wipe clean with one cloth and use another dry cloth for final polish

MRO LIGHT INDUSTRIAL ADHESIVE

A multi-purpose adhesive for bonding light weight materials for either a permanent or temporary bond. Adheres to almost any surface rough or smooth.

• Quick dry
• Resists water
• Flexible and nearly colorless
• Will not soak or penetrate most materials
• Heat resistance up to 250 degrees F (120 degrees C)
• Extension tube furnished for pinpoint application
• All position valve
• Temporary bond: Apply single coat to one surface
• Permanent bond: Apply single coat to both surfaces
• Not recommended on vinyl plastic or vinyl coated surfaces
• Use on paper, cloth, cardboard, felt, rubber, fiberglass, Styrofoam and many plastics, weather stripping and trim, fiberglass insulation to heating ducts, photographic and advertising layout

MRO TOOL CUTTING OIL

A lightweight oil formulated to improve metal cutting operations by cooling and lubricating at the cutting point.

• Resists run off or breakdown
• Eliminates scoring and chatter marks
• Prolongs tool life and cutting edge
• Prevents rust on newly machined parts
• Reduces rejects
• Transparent on the surface
• Extension tube furnished for pinpoint application
• Outperforms average cutting oils -- special pressure and anti-friction agents added
• Effective for both ferrous and non-ferrous machining
• Use for all types of metal cutting, drilling, tapping, threading and machinery, gear cutting, machining tough metals such as stainless steel, inconel, titanium and chromalloy

MRO TOOLMAKER'S BLUE LAYOUT INK

A smooth, dark blue coating that enables accurate scribing without glare.

• Fast dry
• Will not rub off, flake or peel
• Excellent adhesion to metal, glass and plastic
• Non-corrosive
• Resists heat
• Scribes clean precise lines
• Dries to a smooth, level coating
• Eliminates brushes, daubers and spilled containers
• Can be easily and quickly removed with Seymour's MRO Layout Ink Remover
• Use for tool and die makers layouts, sheet metal layouts, alignment of gears and worm drives, machined parts, production layout

MRO TOOLMAKER'S LAYOUT INK REMOVER

A special formulation of solvents for quick and easy removal of layout ink.

• Non-corrosive
• No residue
• Eliminates brushes, daubers and spilled containers
• Convenient and safe aerosol application
• Eliminates secondary cleaning
• Painted surfaces should be protected from overspray
• May be used as a paint and lacquer remover providing the dried coating is thin -- not satisfactory for thick coats of paint
• CAUTION: May attack some types of plastics
• Use wherever a layout fluid is use, tool and die markers layout, sheet metal layouts, machined parts, has limited use as a paint stripper and remover, may be used as a degreaser

CONTACT CLEANER

A specially formulated cleaner for "in place" cleaning of electrical equipment. Can be used while motor is running

• Safe on electrical equipment
• No residue
• Flushing not required
• Apply while motor is running
• Non-flammable
• Use on motors, fans, generators, control panels, armatures and most electrical and electronic equipment
• An extension tube is furnished for pinpoint application
• Note: This product may attack certain plastics
• Due to its complex formulation, first apply to a test area and examine for acceptability

CARB AND CHOKE CLEANER

A formulation of quick acting solvents, for penetration of foreign materials, such as gum, dirt, oil and etc. Quick acting gum solvent.

• Deep penetration
• Dissolves dirt, dust, fuel additives and gum
• Use on all carburetors, PCV systems, automatic chokes, butterfly valves, heat risers. Use on trucks, automobiles, RV's, tractors, construction equipment, marine engines and power mowers
• Best results are obtained when applied at normal room temperature

NON-CHLORINATED BRAKE CLEANER

A specially formulated brake cleaner for less costly waste disposal after use. Contains no chlorinated solvents. Heavy duty.

• Safe disposal after use
• Penetrates and removes contaminates
• Rapid air dry
• Eliminates disc brake squeal
• Does not leave a residue
• All position valve allows can to be used in any position
• Extension tube furnished for pinpoint application
• Completely compatible with oil waste for safe disposal
• Safely removes contaminants from brake linings, down springs, cylinders and disc brake pads
• Can also be used on related brake parts for cleaning and degreasing purposes
• Repeat application may be required for heavily contaminated parts
• Note: Do not use this product on rubber parts

ENGINE AND EQUIPMENT DEGREASER

• Penetrates through grease and oils
• Fast acting formulation
• Biodegradable
• Environmentally safe
• Not VOC compliant

POWER TWO

A biodegradable, natural heavy-duty cleaner/degreaser formulated to meet all critical cleaning requirements. The environmentally safe way to degrease.

• Phosphate free
• Non-flammable
• Concentrated
• Non-abrasive
• Water-based
• Not VOC compliant
• Safe on painted and unpainted metals, ceramics, glass and porcelain
• Active ingredient is a citrus derivative
• No caustic, acidic, chlorinated or petroleum based solvents
• Safe for most surfaces but recommended that a test application be made on all plastic, upholstery and carpet before using
• Use for automotive: engines, parts, chrome, removes grease from upholstery; industrial: parts, pipe threads, printing ink, oil and non-curing adhesives; household: removes grease, tar, ink, tape residue, gum, bugs and grime

Back to Products page

Back to Home page

Copyright © 1995 by Seymour of Sycamore.
Revised: November 06, 1997.