PIT CREW SPECIALTIES

RED INSULATING VARNISH

A general purpose, high gloss red, air drying enamel recommended for use as a finish coat to Class "F" winding or electrical apparatus. This product is especially designed for the protection and sealing of insulated surfaces against deterioration b exposure to oil, moisture, acid and alkali.

• Specially formulated for use on electrical equipment.
• Protects against moisture & corrosion.
• Quick dry.
• High arc resistance and dielectric strength.
• Sprayed object can be handled shortly after spraying.
• Resists cracking and chipping.
• Reduces current leakage.
• Resists chemicals, oil and moisture.
• Use for commutator ends, switchboard parts, motor case interiors, collector rings and shells, armatures, bus bars, field windings of motors, starters and generators.
• Note: To properly clean and prepare surface, use Pit Crew Electric Motor Cleaner #20-2926.

TINTED IGNITION SEALER

Polymer fortified to give ignition system extra protection against moisture. Reduces electrical systems maintenance.

• Excellent dielectric strength.
• Orange tint for uniform coverage.
• Reduces electrical system maintenance.
• Waterproofs and insulates.
• Protects against current leakage, acid and corrosion.
• Use for all types of ignition and electrical systems. Excellent protective coating for electrical equipment, motor end windings, communicator ends, field coatings and armatures.

GASKET REMOVER

Multi-purpose formula for gasket removal.

• Effective removal of gaskets
• Quick & easy to use
• Available in 20 ounce cans

TOOLMAKER'S BLUE LAYOUT INK

A smooth, dark blue, non-glare coating.

• Fast drying -- will not rub off.
• Good adhesion to all metals and glass.
• Non-corrosive.
• Resists heat.
• No flaking or peeling.
• Eliminates using rags and spilled containers.
• Dries to a smooth, level coating.
• Use for tool and die patterns, production layouts, form and cut metal, alignment of gears and worm drives.

TOOLMAKER'S LAYOUT INK REMOVER

A special formulation of solvents for quick and easy removal of layout ink.

• Special solvent to remove layout ink.
• Fast acting.
• Non-corrosive.
• Eliminates brushes, daubers and spilled containers.
• No residue.
• Convenient and safe aerosol application.
• Use wherever a layout fluid is used, tool and die markers layouts, sheet metal layouts, machined parts, has limited use as a paint stripper and remover, and may be used as a degreaser.
• Painted surfaces should be protected from overspray.
• May be used as a paint and lacquer remover providing the dried coating is thin -- not satisfactory for thick coats of paint.
• CAUTION: May attack some types of plastics

Back to Products page

Back to Home page

Copyright © 1995 by Seymour of Sycamore.
Revised: November 06, 1997.