SEYMOUR SPECIALTIES

RED INSULATING VARNISH

A general purpose, high gloss red, air drying enamel recommended for use as a finish coat to Class "F" winding or electrical apparatus. This product is especially designed for the protection and sealing of insulated surfaces against deterioration b exposure to oil, moisture, acid and alkali.

• Specially formulated for use on electrical equipment
• Protects against moisture & corrosion
• Quick dry
• High arc resistance and dielectric strength
• Sprayed object can be handled shortly after spraying
• Resists cracking and chipping
• Reduces current leakage
• Resists chemicals, oil and moisture
• Use for commutator ends, switchboard parts, motor case interiors, collector rings and shells, armatures, bus bars, field windings of motors, starters and generators
• Note: To properly clean and prepare surface, use Pit Crew Electric Motor Cleaner #20-2926
• Available in 20 ounce aerosol cans

TINTED IGNITION SEALER

Polymer fortified to give ignition system extra protection against moisture. Reduces electrical systems maintenance.

• Excellent dielectric strength
• Orange tint for uniform coverage
• Waterproofs and insulates
• Protects against current leakage, acid and corrosion
• Use for all types of ignition and electrical systems. Excellent protective coating for electrical equipment, motor end windings, communicator ends, field coatings and armatures
• Available in 20 ounce aerosol cans

TOOLMAKER'S BLUE LAYOUT INK

A smooth, dark blue, non-glare coating.

• Fast drying -- will not rub off
• Good adhesion to all metals and glass
• Non-corrosive
• Resists heat
• No flaking or peeling
• Eliminates using rags and spilled containers
• Dries to a smooth, level coating
• Use for tool and die patterns, production layouts, form and cut metal, alignment of gears and worm drives
• Available in 20 ounce aerosol cans

TOOLMAKER'S LAYOUT INK REMOVER

A special formulation of solvents for quick and easy removal of layout ink.

• Special solvent to remove layout ink
• Non-corrosive
• Eliminates brushes, daubers and spilled containers
• No residue
• Use wherever a layout fluid is used, tool and die markers layouts, sheet metal layouts, machined parts, has limited use as a paint stripper and remover, and may be used as a degreaser
• Painted surfaces should be protected from overspray
• May be used as a paint and lacquer remover providing the dried coating is thin -- not satisfactory for thick coats of paint
• CAUTION: May attack some types of plastics
• Available in 20 ounce aerosol cans

CEILING TILE PAINT

A special water based formulation for touching up stains that appear on both textured and acoustical ceiling tiles.

• Fast dry
• Maintains acoustic properties
• Easy over-head application
• Matches color of tile, new or old white
• Kills stains
• VOC compliant
• Will not warp or sag tiles
• Must be used in an upright position and is activated by tipping sprayhead to the side
• To prevent clogging, can must be inverted and sprayed for two seconds to clear sprayhead
• Use for all fiber type ceiling tiles and air conditioning vents
• For ease of application, use Spray Wand #Z-606 (33" extension) or Stripe Gun #Z-605.
• Available in 20 ounce aerosol cans in 2 colors

WHITE OUT (Surface Sealer)

A specially formulated primer sealer that blocks out and seals stains made by smoke, water, fire, lipstick, ink, crayon, grease or other similar household products.

• Interior and exterior surfaces
• Fast dry
• VOC compliant
• Can be top coated with many types of paints
• Excellent hiding qualities
• Use for plaster, drywall, concrete, stone, tile, plastic, laminates, aluminum, galvanized & interior steel, and bare, non-bleeding wood
• Also ideal for eliminating stains under wall coverings
• Available in 20 ounce aerosol cans

SEYMOUR RAPID SEAL

A tough, flexible, rubberized sealant for temporary or permanent applications on a variety of surfaces. Elastic barrier seals out moisture.

• Fast dry
• Resists rust, road salts, alkali and acids
• Allows maximum build-up without sagging
• VOC compliant
• Can be top coated after curing without bleed-through
• Resists temperature extremes
• Deadens sound
• Use for roof areas, such as: skylights, flashings, air vents, gutters, shingles, antenna installations
• Also use in small cracks/holes in driveways, tree/shrub pruning, leaks in pails & waste receptacles & vehicle undercoating
• Comes with an easy to attach extension tube for access to those hard to reach areas
• Available in 20 ounce aerosol cans

HIGH TEMPERATURE CAST IRON GRAY

A professional grade coating designed for continuous use at temperatures up to 1200 degrees F (649

degrees C).

• Painted parts are ready for use in minutes
• Will not crack, flake or deteriorate under continuous high heat use
• Duplicates the 'new casting' look
• Tack free in 10 minutes
• Product will remain soft and have poor adhesion until it is heated, in service, to 450 degrees F (232 degrees C) for one hour
• Formulation contains a high temperature silica that bonds to the surface in a porcelain like film at high temperatures
• Ideal for exhaust headers, manifolds and other external parts subject to high heat
• Available in 16 ounce aerosol cans

BLACK WRINKLE FINISH

A durable and long lasting finish which has a unique wrinkled texture.

• Excellent hiding qualities
• Hides surface imperfections
• Resists oil, gasoline and grease
• Can be used where harsh conditions breakdown other coatings
• Two heavy coats are needed with the second coat being applied approximately three minutes after the first coat
• The two heavy coats are required to provide adequate thickness for 'wrinkling'
• The 'wrinkling' effect does not appear immediately after spraying
• Minimum of eight hours of drying is required
• Use for home and office equipment, marine and automotive, instruments and tool boxes
• Available in 16 ounce aerosol cans

Stainless Steel

A special formulation containing stainless steel pigment to provide maximum corrosion resistance and protection against weather, sunlight, oil and water.

• Formulated using 100% of type 316L stainless steel pigment
• USDA authorized for use in meat and poultry packing plants
• Fast drying, reduced overspray and resists UV light (non-yellowing)
• Ideal for home, industrial, automotive, marine, aeronautical and special applications like tools and machinery
• VOC compliant
• Dries quickly to a satin sheen finish
• It is recommended as a topcoat and not a primer. A primer is always beneficial, and any of the following primers are recommended: HiTech White Primer, HiTech Red Iron Oxide Primer, HiTech Black, HiTech Yellow Zinc Phosphate, HiTech Green Zinc Phosphate, HiTech Light Gray Primer and HiTech Spra-Galv
• Available in 16 ounce aerosol cans

Chrome Brite

Produces a brilliant high-gloss chrome aluminum finish. Excellent for touch-up or refinishing auto bumpers or almost any non-porous surface. "Chrome Brite" is so shiny and bright, it's almost like chrome.

• Reduced overspray
• Excellent hide properties
• Fast drying
• Use for both indoors and outdoors
• Use for touch-up or refinishing auto bumpers, almost any surface where a chrome-like finish is desired in the home, automotive or industrial situations
• Occasional repainting may be necessary depending on use and exposure
• VOC compliant
• Available in 16 ounce aerosol cans

Quiet Seal I

A black, asphalt base autobody undercoating that remains pliable even at extreme temperature changes.
Seals out rust producing moisture.

• Acts as a sound barrier
• Remains flexible
• Seals out water, fumes, road chemicals and dust
• Not affects by temperature extremes
• Use on panel and fender undersides, trunk wells, and all chassis parts
• VOC compliant
• Available in 20 ounce aerosol cans

Quiet Seal II

A black, rubberized undercoating for all automotive under surfaces.Reduces road noise.

• Prevents rust
• Seals out water, fumes, road chemicals and dust
• Reduces lingering odor associated with undercoatings
• No "bleed through" when top coated
• No sagging
• VOC compliant
• Use for panel and fender undersides, hoods and decks, trunk interiors, section repairs, weld joints and rust holes
• Sprays evenly and dries completely to a smooth consistency
• Can be top coated with any of Seymour's automotive finishes
• Available in 20 ounce aerosol cans

ALUMI-MATCH (Touch-Up Paint)

A professional grade of touch-up paint that matches the color of most aluminum building structures.

• Fast dry
• Resists fading
• VOC compliant
• Reduced overspray
• Closely matches original color
• Structural aluminum colors may vary by source, lot, run and age or substrate
• Not for anodized aluminum
• Use for all aluminum & metal structures such as: doors, window frames, siding, gutters and screen enclosures
• Touch-up scratches & abrasions before and after installation
• Available in 16 ounce aerosol cans in 7 colors

UNIVERSAL SOLVENT BLEND

A solvent blend for custom fill machines.

• Can be used with enamel, lacquer, vinyl and acrylic paints
• Packed twelve 16 ounce cans per case
• Case dimensions are: 11" wide X 8 3/8" deep X 8 1/4" high
• Seymour's standard freight, allowances and order minimums apply
• Can mix and match order with any Seymour product

Back to Products page

Back to Home page

Copyright © 1995 by Seymour of Sycamore.
Revised: November 06, 1997.