WaveMaster Products

WAVEMASTER PRODUCTS

HARD HULL COAT

Unique hard, high gloss resin system that seals microscopic pores in fiberglass. Its hard slick surface provides a barrier coat that resists staining. It allows for easy release of most marine growth and other waterborne contaminants.

Provides easier release of marine growth
Seals microscopic pores in fiberglass
Reduces gelcoat peeling and blistering
High gloss, clear finish protects gelcoat from sun fade and oxidation
Maximizes fuel efficiency and performance
Contains no heavy metals
Non-sacrificial
No muriatic acid when cleaning
Salt water, gas and chemicals will not harm finish
Not to be used on boat decks
Benefits can extend over a three year period depending on boat usage, storage and water conditions
Suggested uses include: Fiberglass boat hulls above and below the water line, buoys, outdrives, transducers, prop shafts, boat lifts, personal water craft, trim tabs, sail boats, bottom of surf boards, and other water submerged objects
Available in 16 ounce non-aerosol & 20 ounce aerosol cans

HYDRO GLIDE (Ultimate speed in a can)

Clear, super slick resin system that bonds to surface. This product was designed to stand alone or to be a top coat to Hard Hull Coat. To be used when maximum performance and speed are of the utmost concern.

Allows water to release off boat
Reduces surface friction (water drag)
Increases boat speed
Ultimate in slick friction reducing coatings
High gloss clear finish
Increases fuel efficiency
Apply Hydro Glide as needed on fiberglass, painted or varnished surfaces. Check inconspicuous area to make sure paint does not lift or wrinkle
Eight ounce size for smaller applications such as personal watercraft
Sixteen ounce size will cover approximately 250 square feet
Use for boat hulls, outdrives, transducers, trim tabs, personal watercraft, sail boats, surf boards, canoes, kayaks & etc.
Available in 8 ounce, 16 ounce and one gallon sizes

PROTECT-IT VINYL TREATMENT

Clear, greaseless vinyl treatment that will not attract dirt or dust. Protects vinyl from stains and sun exposure. Restores luster to old vinyl and keeps it soft and supple.

Greaseless formulation
Makes cleanup a snap
Protection lasts for multiple seasons
Vapor permeable -- allows objects to breath
Easy wipe-on application
Covers approximately 50 square feet
Protects against: dirt, food stains, grease, sun lotions, bird droppings, markings
Use for vinyl, interiors, seats, cushions, floats, sun pads
Available in 8 ounce non-aerosol and one gallon sizes

REPEL IT CANVAS PROTECTION

An excellent oil-free clear, water repellent with U.V. screeners that will not attract dirt or dust. Keeps fabrics soft and supple.

Restores water repellency to old canvas
Improves repellency to new canvas
Blocks out ultraviolet rays
Helps to maintain color in fabrics and canvas
Quick dry formulation
Sprayed object can be placed in moisture 20 minutes after application
Covers approximately 450 square feet
Uses include: canvas, fabrics, duffels bags and totes, tennis shoes, umbrellas, sails, tents, boat covers
Available in 20 ounce and one gallon container sizes

MARINE CORROSION INHIBITOR

A mixture that contains a highly refined lubricant, penetrant and a water displacing chemical.

All position valve allows can to be used in any position
Extension tube is supplied for pinpoint application
Reduces friction and stops squeaks
Sprayed film spreads and penetrates for excellent contact with rubbing parts
Displaces moisture and prevents rust
Extremely low surface tension
Meets the following government specifications: MIL-C-16173D and MIL-C-23411 (metal corrosion tests), and MIS-C-22235A (stain test)
Does not contain silicone
Use for bearings, gears, hinges, chains, frozen nuts and bolts, hitches, latches threads and pulleys
Available in 20 ounce aerosol cans

POWER TO IT

A new and improved heavy duty cleaner/degreaser that is safe and has power too.

Contains no caustic, acidic, chlorinated or petroleum based solvents
Active ingredient is a citrus derivative
Contains no CFC's
Biodegradable
Propellant evaporates in seconds leaving the all natural cleaner
No environmentally harmful or caustic materials which can damage delicate parts
Effectively removes grease, oils, grime, road tar, printing inks and most non-curing tape and adhesive residue
Use on aluminum, stainless steel, ceramic, glass, porcelain and many plastics. Also good for chrome, *carpets and upholstery
*NOTE: Test on all plastic, upholstery and carpets before using
Available in 20 ounce aerosol cans

CLEAN-IT MULTI-PURPOSE CLEANER

A quick working cleaner for many applications. Contains ammonia plus several other cleaning additives.

Does not leave a film
Brightens and polishes
Cuts through greasy film
Non-abrasive, yet cleans gritty dirt
Due to its complex formulation, this product should first be applied to a test area and examined for acceptability
Uses include: Lexan, mirrors, vinyl, chrome, stainless steel, plastic, rubber, fiberglass
Available in 20 ounce aerosol and refillable 20 ounce trigger spray. One gallon jugs sold separately.

MOLD RELEASE

A silicone polymer release agent for molds.

Long lasting
Non-migrating
Extends mold life
Easy to apply
Flows and levels quickly
Mold must be free of all dirt, wax, foreign material & etc.
Overnight cure will increase the life of the coating, however mold can be placed in production after 30 minutes curing time
Use with Seymour's Cleaner/Degreaser to clean mold before coating with Mold Release
Uses include: Fiberglass molds (both large and small) and plastic molds
Available in 16 ounce and one gallon sizes

WAVEMASTER ENAMEL

A premium grade paint formulated for general purpose applications where maximum indoor/outdoor coating performance is required.

Fast drying
Sag-free spray
Outdoor durability
Excellent hiding qualities
Resists rust and most chemicals
Maximum protection
Long lasting appearance
Abrasion resistant
Available in popular high gloss, semi-gloss and flat finishes
Bare or rusted metal surfaces should be cleaned then primed
A high quality coating for wood, metal and most other surfaces both interior and exterior in the following areas: home, automotive, industrial, marine, aeronautical or construction
6 colors

WAVEMASTER LACQUER

A fast drying general purpose coating that provides a durable finish both indoors and outdoors on most surfaces. Resistant to the effects of weather and many chemicals, solvents and cleaners.

Reduced overspray
Excellent hiding qualities
Resists most chemicals
Sag free
Resists fading, chipping and abrasion
A finished coating for metal, wood and most other surfaces both indoors and outdoors found in the following areas: home, automotive, industrial, marine, construction and aeronautical
Bare surfaces or rusted metal surfaces should be primed
6 colors

WAVEMASTER PRIMER

A fast drying surface sealer that provides maximum rust protection and better adhesion for a finished top coat.

Reduced overspray
Sag free
Excellent hide
Sandable
Effective against rust and chemicals
Outdoor and indoor durability
Excellent for prepared bare metal or wood surfaces for a finish coat both interior and exterior
Use for structural steel, machinery, farm equipment, steel window frames and lawn furniture
Rusted surfaces should be thoroughly cleaned with the aid of a wire brush or comparable tool prior to application
For maximum adhesion, sand lightly with fine sandpaper or steel wool prior to applying finish coat
5 colors

WAVEMASTER ENGINE PAINT

A special formulation for close work application which produces a coating of superior durability under various stress conditions. Restores original factory color to engines, transmissions and other OEM equipment.

Reduced overspray
Excellent hiding qualities
Heat resistant
Hard gloss finish
Sag resistant
Original factory colors
Resists abrasion, cracking and checking
Suggested uses are automotive engines, marine engines, transmissions, industrial applications where resistance to gasoline, oil and grease is needed
22 colors

Back to Products page

Back to Home page