| DATE | LECTURE/DEMO | PRACTICE |
| April 28 | Introductions Safety Plane and Square |
Sharpening and adjusting a plane; Trueing up stock with plane, square and marking guage. |
| May 5 |
Gross structure of Wood Chisels Green Sand molding demonstration Pattern design: draft and shrinkage Begin discussing projects |
Sharpening chisels; Paring an arc; Plane and Square continues. Discuss projects. |
| May 12 |
Handsaws Holes and circles Disc sander The bandsaw The drill press |
"Pusher" job; Spinning a Boss;Sanding an arc. Projects ready for approval. |
| May 19 |
Forming edges and corners Fillets Pattern design: Parting and split patterns The Joiner Ripping on the Table Saw Project design review |
Finish Pusher job; Obelisk Job; Simple Built-up Pattern; Laying out and Sawing large radiuses; Prepare a split spindle. Begin Projects. |
| May 26 |
Project review The Table Saw: Cutting Off The Lathe Scribing w/ dividers and hermaphrodite calipers |
Simple spindle Turning; Obelisk job continues. Projects continue |
| June 2 | Project review The Scroll Saw The Joiner Face plate turning The half lap joint |
Making a simple bowl; Half lap joint.
Projects continue |
| June 9 | Project review Pattern Design: Cores Spindle Sander |
Making a simple core box; Bowls and spindles continue. Projects continue Patterns ready to mold |
| June 16 | Project review |
Bowls and spindles continue. Projects continue. |
| June 23 | Project review |
Finish Projects. General clean-up and shop maintenence |